HERRITECH VENTURES LTDDairy, vending and industrial systems

Home › Guides › Water treatment

Chemical Dosing Pumps for Water Plants: Uses, Sizing and Prices

Herritech engineering teamUpdated 30 September 20263 min read

Chemical Dosing Pumps for Water Plants: Uses, Sizing and Prices
Quick answer: A chemical dosing pump adds a precise amount of chemical to flowing water: chlorine for disinfection, antiscalant to protect RO membranes, or pH correction. H-TECH dosing pumps (1–15 L/h) cost KSh 23,000 to KSh 28,200 in Kenya. Size the pump so it can deliver your required dose at your plant's flow rate.
Key facts
  • Price range: KSh 23,000 – KSh 28,200 (1–15 L/h)
  • Common uses: chlorine, antiscalant, pH correction, coagulants
  • Size: dose rate × plant flow → litres of solution per hour
  • Mount on a chemical tank; wear gloves and eye protection
On this page
  1. What a dosing pump is used for
  2. Dosing pump prices
  3. How to size a dosing pump
  4. Setup and safety
  5. Frequently asked questions

What a dosing pump is used for

ChemicalWhy
ChlorineDisinfect raw water and storage tanks
AntiscalantStop scale forming on RO membranes
pH correctionAdjust acidic or alkaline water
CoagulantHelp filters remove fine particles

Dosing pump prices

H-TECH dosing pump range (maximum output):

CapacityPrice
1 LPHKSh 23,000
2 LPHKSh 23,000
3 LPHKSh 23,000
5 LPHKSh 23,000
6 LPHKSh 23,000
10 LPHKSh 28,200
15 LPHKSh 28,200

Current listed prices incl. VAT (updated 30 September 2026). Order: H-TECH Chemical Dosing Pump Range.

Ready-to-order dosing pumps and dosing tank:

ProductPrice
Dosing Pump 2l/hKSh 23,000
Dosing Pump 5l/hKSh 28,000
Chemical dosing tankKSh 12,000

Current listed prices incl. VAT (updated 30 September 2026).

How to size a dosing pump

  1. Find your plant flow (for example 1,000 litres per hour).
  2. Take the dose the chemical supplier recommends.
  3. Work out how many litres per hour of mixed chemical solution that needs.
  4. Choose a pump whose maximum output is comfortably above that, so it runs mid-range.

Setup and safety

Protecting RO membranes? Read why RO plants need antiscalant.

Frequently asked questions

How much is a dosing pump in Kenya?

H-TECH dosing pumps cost KSh 23,000 to KSh 28,200 depending on capacity.

What size dosing pump do I need?

One whose maximum output is above the solution flow your dose requires at your plant flow rate.

Can one pump dose two chemicals?

No. Use a separate pump and tank for each chemical.

Where is antiscalant injected?

Before the RO membranes, usually after the cartridge filters, as the plant design specifies.

↑ Back to top
Get quoteWhatsAppCall