H-TECH water treatment catalogue
UF Ultrafiltration Systems Ultrafiltration (UF) systems and membrane modules. Prices change with stock and exchange rates, so every item is price on request : tap Ask for price and we reply on WhatsApp with today's price and the right size for your water.
All categories Air Compressors Brine Tanks & Accessories Control Valves Controllers & Automation Disk Filters Domestic RO Systems EDI & Ultrapure Water Filter Cartridges Filter Housings Flow Meters & Instruments Water Pumps Filter Media RO purifier parts & Accessories Pipes, Fittings & Couplings Pre-filters & Whole-house Filters Pressure & RO Tanks RO Membranes & Housings UF Ultrafiltration Systems UV & Ozone Sterilization Valves & Actuators Water Distributors & Vessel Parts Water Softeners HT-UF-001 H-TECH 5-Stage UF Water Purifier (10" Housings) 5-stage ultrafiltration purifier; no electricity or waste water Manual-flush UF membrane 10" single O-ring housings, standard fittings HT-UF-002 H-TECH 5-Stage UF Water Purifier (Quick-Fit) 5-stage ultrafiltration purifier with quick-fit cartridges Manual-flush UF membrane Compact wall/under-sink frame HT-UM-014 H-TECH Outside-In UF Membrane Modules (Threaded / Victaulic) Outside-in hollow-fibre modules for higher-solids water Threaded (B) or Victaulic (A) connections HT-UM-008 H-TECH UF Membrane Module 125×1092 mm (PES), 0.6–1.0 m³/h Hollow-fibre polyethersulfone (PES), 80,000 MWCO Inside-out pressurised module; max 0.3 MPa UPVC/acrylic housing with threaded or Victaulic ends For municipal UF plants, water ATMs and RO pre-treatment HT-UM-009 H-TECH UF Membrane Module 160×1100 mm (PES), 1.2–2.0 m³/h Hollow-fibre polyethersulfone (PES), 80,000 MWCO Inside-out pressurised module; max 0.3 MPa UPVC/acrylic housing with threaded or Victaulic ends For municipal UF plants, water ATMs and RO pre-treatment HT-UM-002 H-TECH UF Membrane Module 160×1100 mm (PS), 1.2–2.0 m³/h Hollow-fibre polysulfone (PS), 67,000 MWCO Inside-out pressurised module; max 0.3 MPa UPVC/acrylic housing with threaded or Victaulic ends For municipal UF plants, water ATMs and RO pre-treatment HT-UM-010 H-TECH UF Membrane Module 200×1650 mm (PES), 2.4–4.0 m³/h Hollow-fibre polyethersulfone (PES), 80,000 MWCO Inside-out pressurised module; max 0.3 MPa UPVC/acrylic housing with threaded or Victaulic ends For municipal UF plants, water ATMs and RO pre-treatment HT-UM-003 H-TECH UF Membrane Module 200×1650 mm (PS), 2.4–4.0 m³/h Hollow-fibre polysulfone (PS), 67,000 MWCO Inside-out pressurised module; max 0.3 MPa UPVC/acrylic housing with threaded or Victaulic ends For municipal UF plants, water ATMs and RO pre-treatment HT-UM-011 H-TECH UF Membrane Module 225×1503 mm (PES), 2.7–4.5 m³/h Hollow-fibre polyethersulfone (PES), 80,000 MWCO Inside-out pressurised module; max 0.3 MPa UPVC/acrylic housing with threaded or Victaulic ends For municipal UF plants, water ATMs and RO pre-treatment HT-UM-004 H-TECH UF Membrane Module 225×1503 mm (PS), 2.7–4.5 m³/h Hollow-fibre polysulfone (PS), 67,000 MWCO Inside-out pressurised module; max 0.3 MPa UPVC/acrylic housing with threaded or Victaulic ends For municipal UF plants, water ATMs and RO pre-treatment HT-UM-012 H-TECH UF Membrane Module 315×1503 mm (PES), 3.3–5.5 m³/h Hollow-fibre polyethersulfone (PES), 80,000 MWCO Inside-out pressurised module; max 0.3 MPa UPVC/acrylic housing with threaded or Victaulic ends For municipal UF plants, water ATMs and RO pre-treatment HT-UM-013 H-TECH UF Membrane Module 315×1503 mm (PES), 4.8–8.0 m³/h Hollow-fibre polyethersulfone (PES), 80,000 MWCO Inside-out pressurised module; max 0.3 MPa UPVC/acrylic housing with threaded or Victaulic ends For municipal UF plants, water ATMs and RO pre-treatment HT-UM-005 H-TECH UF Membrane Module 315×1503 mm (PS), 3.3–5.5 m³/h Hollow-fibre polysulfone (PS), 67,000 MWCO Inside-out pressurised module; max 0.3 MPa UPVC/acrylic housing with threaded or Victaulic ends For municipal UF plants, water ATMs and RO pre-treatment HT-UM-006 H-TECH UF Membrane Module 315×1503 mm (PS), 4.8–8.0 m³/h Hollow-fibre polysulfone (PS), 67,000 MWCO Inside-out pressurised module; max 0.3 MPa UPVC/acrylic housing with threaded or Victaulic ends For municipal UF plants, water ATMs and RO pre-treatment HT-UM-007 H-TECH UF Membrane Module 90×1000 mm (PES), 0.3–0.5 m³/h Hollow-fibre polyethersulfone (PES), 80,000 MWCO Inside-out pressurised module; max 0.3 MPa UPVC/acrylic housing with threaded or Victaulic ends For municipal UF plants, water ATMs and RO pre-treatment HT-UM-001 H-TECH UF Membrane Module 90×1000 mm (PS), 800 L/h Hollow-fibre polysulfone (PS), 67,000 MWCO Inside-out pressurised module; max 0.3 MPa UPVC/acrylic housing with threaded or Victaulic ends For municipal UF plants, water ATMs and RO pre-treatment Compare products Select up to three products.
Compare selected Clear 
