HERRITECH VENTURES LTDDairy, vending and industrial systems

Home › Guides › Motors and drives

Electric Motor Maintenance Checklist for Pumps, Mills and Workshops

Herritech engineering teamUpdated 18 November 20263 min read

Electric Motor Maintenance Checklist for Pumps, Mills and Workshops
Pictured: POWER-UK ELECTRIC MOTOR 2HP (High speed) and POWER-UK ELECTRIC MOTOR 3HP (High speed).
Quick answer: Keep motors running by keeping them clean and cool (clear fins and fans), checking vibration, noise and temperature, greasing bearings on the maker’s schedule (not too much), checking alignment, belts and couplings, tightening terminals, and having an electrician run an insulation (megger) test yearly or after flooding. Record each check so you spot trends before failure.
Key facts
  • Clean and cool
  • Grease bearings correctly
  • Alignment and belts
  • Yearly insulation test
On this page
  1. Motor Maintenance Checklist
  2. Why Motors Overheat
  3. Bearings: Grease Right, Not More
  4. Motors at H-TECH
  5. Rewind or Replace?
  6. Mistakes to Avoid
  7. Frequently asked questions

Motor Maintenance Checklist

WhenCheck
DailyUnusual noise or vibration; smell of burning; motor not too hot to touch for long
WeeklyClean fins and fan cover; check guards; check belts for slip
MonthlyCheck alignment and coupling; tighten mounting bolts; check current draw against nameplate
Every 3–6 monthsGrease bearings per the maker (right grease, right amount)
YearlyInsulation resistance (megger) test and terminal inspection by an electrician

Safety: cables, breakers, earthing and connections must be designed, installed and tested by a qualified electrician to the wiring regulations. These figures help you plan and ask the right questions; they do not replace an electrical design.

Why Motors Overheat

Bearings: Grease Right, Not More

Over-greasing is as harmful as under-greasing: it heats bearings and can push grease into windings. Use the grease type and quantity the maker specifies, clean the nipple first and listen for change in noise.

Motors at H-TECH

Current listed prices incl. VAT (updated 18 November 2026).

Rewind or Replace?

After a burn-out, compare the rewinding cost and efficiency with a new motor: see rewinding vs replacement. Plan maintenance across all machines with a preventive maintenance schedule.

Mistakes to Avoid

Frequently asked questions

How do I maintain an electric motor?

Keep it clean and cool, watch noise, vibration and temperature, grease bearings correctly, check alignment and belts, and test insulation yearly.

How often should motor bearings be greased?

Follow the maker’s interval and quantity; common intervals are every few months depending on speed and duty.

Why is my electric motor overheating?

Blocked cooling, overload, low or unbalanced voltage, too many starts, or bearing and alignment problems.

What is a megger test?

An insulation resistance test that checks winding insulation; it should be done by a qualified electrician.

Should I rewind or replace a burnt motor?

Compare rewind cost, efficiency and motor age with a new motor before deciding.

↑ Back to top
Get quoteWhatsAppCall